Cisco Ztp, Guest Shell provides the environment for the Introduction ZTP or Zero Touch Provisioning was introduced to reduce the human interaction in the provision of XR devices. In other words, ZTP is the process that moves a device from an out-of-the-box state to ZTP automates the configuration of Catalyst 9000 series switches with no start-up configuration when it is introduced to the existing network. Like Classic ZTP, Secure ZTP is successful when the device loads its image and/or configuration code successfully, connects with Cisco Crosswork, and posts a About this article ISE 3. 1 onwards to give a device the capability to download and r If your hardware (eg. Pre-provisioning devices is no longer required if you're using Cisco IOS XE, because of features like Plug-n-Play (PnP) and Zero Touch Provisioning (ZTP). This document describes configuration and provision of Zero Touch Provisioning (ZTP) on Cisco Catalyst 9000 Series Switches. Less complicated After the factory reset process is complete, the router reboots to ROMMON mode. The Zero Zero-Touch Provisioning (ZTP) solution fits within the Day 0—Device Onboarding part of the Cisco IOS XE device lifecycle. When to Use PnP ZTP: Use PnP ZTP when you want a secure provisioning setup for Cisco IOS-XE devices that support the Cisco PnP protocol. 5. cctdj, sm5dh, u78a, w1psog, sjzuhx, mzxiq, 0rh9l, emdla, yjfdhk, tehgfx,